Description
AAT-175 is a solvent based adhesive for securing carpet padding: foam, jute, hair, synthetic fiber, rubberized felt,
sponge rubber and urethanes (primes and rebonds). AAT-175 fastens padding to most any surface – wood, concrete,
metal deck, terrazzo, ceramic or floor tiles (clean and free of wax).
Warning:
EXTREMELY FLAMMABLE – Vapors may cause flash fire. DO NOT use near fire or flame!
Application Instructions:
1. The floor must be clean, dry, and free of dust, dirt, grease, oil or any other contaminants.
2. There is an inner seal under screw cap of container. Punch a 1/8 inch diameter hole in this seal.
3. Pour adhesive on the floor in a bead approx. 4 inches from wall and then zig zag bead over the entire
floor.
4. Spread the adhesive thin with scrap piece of carpet.
5. Allow adhesive to dry 5-15 minutes and then roll pad into exact position required.
6. Use AAT-197 to remove adhesive on spills or clean-up.
NOTE: Before beginning installations with carpet padding or over sub-floors not mentioned above, please contact
AAT Technical Services for recommendations.
**STORE PICK UP ONLY**
CAUTION
DANGER! EXTREMELY FLAMMABLE! VAPORS MAY CAUSE FLASH FIRE. DO NOT USE NEAR FIRE OR FLAME!
This product is an extremely flammable mixture. Adequate ventilation is essential to prevent build up of vapors to an explosive concentration.
Use only with positive fresh air cross- ventilation.
Use explosive proof fans,motors and other equipment.
Prevent prolonged or repeated breathing of vapors or mist. Vapors are heavier
than air and can collect in low areas, such as basements. Do not use in these areas; unless they can be thoroughly ventilated before, during and after installations.
Do not store or use near heat, flames or sparks of any type.
Keep container closed when not in use. Use appropriate safety equipment – splash goggles, gloves and where high vapor concentrations exist, vapor respirators.
KEEP OUT OF REACH OF CHILDREN & PETS.
MATERIAL IS SOLD FOR PROFESSIONAL USE ONLY.
Sale to consumer is a Violation of Federal Law.
Specs/MSDS: http://www.aatglue.com/175-Pad-Adhesive-Flammable-.html
