Description
AAT-432 is an acrylic latex based adhesive, non-flammable, and specifically formulated for the installation of rubber or vinyl cove base. AAT-432 is suitable for installations to almost any clean, dry, and structurally sound wall surface, and is water-resistant when cured. Apply adhesive directly to base or wall. Stay 1/8” away from top of base to prevent oozing. After placing base roll with a hand roller. Continue in like manner until all base has been placed. Roll toward previously installed section to insure a tight fit.
NOTE: Not recommended over vinyl wall coverings or non-porous paints. Wall surfaces should be structurally sound, dry, clean, smooth, and free from moisture, alkali, dust, dirt, wax, oil, grease, loose paint or plaster, wall coverings, or any other foreign material.
Specs/MSDS: http://www.aatglue.com/432-Modified-Acrylic-Cove-Base-Adhesive.html